CQ Medical

ALRA Skin Care

This special line of skin care products is designed to provide gentle, effective care for patients undergoing radiation therapy. The moisturizer contains aloe vera, lanolin, Vitamin E, collagen and allantoin. It is fragrance-free. Unlike regular antiperspirants, the ALRA deodorant stick contains no metallic ingredients that can interfere with radiation. It contains the natural astringent cypress oil and the natural bactericide lichen. Patients can order ALRA products directly from us (North America only).

Aquaplast RT Thermoplastic Sheets & Adapt-It Thermoplastic Pellets

Used for hard-to-form areas such as: chest wall, nose, parotid, groin, ears, and any irregularly surfaced anatomical feature. The attenuation characteristics are comparable to other polymer-based products. Both products soften in hot water or RapidHeat Oven. It reduces setup time and minimizes air gaps and day-to-day variability. Thermoplastic Sheets are available in a wide variety of additional sizes and thicknesses.

Bolus

Bolus (Bolx® & Bolx II®) is made from a solid, tissue-equivalent gel. It will not sag, deform or run. Bolus is available "skinless", or encased in a tough layer of thin plastic "skin".

Calipers

Body Calipers can be used for tabletop distances to determine central-axis and off-axis measurements. The reversing caliper orientation assists in determining separations such as laterals, obliques and off-table measurements. The wide base ensures perpendicularity to tabletop. A color-coded scale on both sides eliminates confusion with scale orientation. It is made of precision-machined aluminum with a gold-tone finish. Components are hand-tapped, counterbored and assembled with steel screws for strength and stability. The easy-to-read screen-printed scale is protected from wear by a recessed sliding scale indicator.

Grip Rings™

Grip rings offer patients an extra measure of security and comfort. The tough blue vinyl is smooth and easy to wipe clean with most antibacterial solutions. Grip Rings are sold individually and in sets.

Incontinence Clamps

Iso-Align™

The Iso-Align is a multi-purpose quality assurance device designed to assist in the routine secondary verification of linear accelerators and room lasers. The Iso-Align accommodates a convenient film pack for radiation and light field verification. The Iso-Point Rotational Runout Tool on the Iso-Align allows you to accurately and easily verify the mechanical isocenter of the gantry. In addition, the Iso-Align can be used to verify multiple aspects of linear accelerators and room lasers, including:

Patient Transfer Board

The Patient Transfer Board is designed to ease patient transfer from a bed or stretcher to a treatment table with minimum effort. The board is constructed of a durable polyethylene material.

Pellet Bowl

Ideal for heating the desired amount of Adapt-It Thermoplastic Pellets in either a hot air oven or water bath. The compact and lightweight bowl can hold approximately ½ lb of pellets and can be fully expanded to 2" height or 0.5" when collapsed flat.

Setup Rulers

Great aid to help with the setup of patients. These rulers start at "0" from the edge and the unit of measurement is millimeters. For reference only.

Table Strap

The Table Strap ensures patient control, safety and comfort with a strong material that feels soft to the touch. The Table Strap features a two-way adjustable fastener made of double-faced Velcro® brand loop. It can be washed and sterilized. Individually packaged. 4" wide x 72" long.

Testicle Shield Stand

This adjustable stand offers increased patient comfort while raising or lowering the shield. A manual adjustment knob allows for easy vertical positioning from 1–10" (2.54–25.4 cm). The stand can be used for anterior and posterior treatments.

Testicle Shields

Testicle Shields are designed to reduce scatter radiation to the testicles. Each unit is cast to provide a lead wall with a thickness of ½" (1.27 cm) and features an open sector to allow comfortable attachment to the patient. All surfaces are coated with a polyurethane paint. The shield's top and bottom sections are secured with either the two included rubber straps or nylon tape. When using the testicle shield stand, no straps are needed.

TG66 CT Simulation Laser QA Device

This unique device is used to complete secondary specific quality assurance checks of CT scanners and room lasers, in accordance with the recommendations of AAPM's TG66. Easily indexed to the CT table, this clearly-marked tool helps perform an array of important QA checks, including:

Unlimited Scissors

Headrest Adapters

Headrests provide enhanced repositioning, accuracy and patient comfort. Many headrests are compatible with our three head & neck patient positioning systems (Type-S, Posifix or Uni-frame) and Wing Boards directly or via an adapter.

InfinityLock™ Bridges & Paddle

The InfinityLock Bridges attach to the edges of the Alta multipurpose device to help immobilize the patient and reduce organ motion.

Thigh Compression VacQfix Cushion

Complete leg immobilization with adjustable, snap-on attachment along InfinityLock compression bridge.

DecoColor™ Markers

Oil-based paint markers that are acid-free, lead-free and non-toxic. Available in an assortment of colors. (DecoColor markers are intended to be used for marking masks and shells, not for use in marking directly on skin.)

Disposable Rectal & Vaginal Markers

ShadowForm® Markers are used for simulation and CT planning. They are available in Rectal and Vaginal Markers; both have flexibility. They have a T-bar handle and can easily be removed for the optional insertion of barium.

Setup Rulers

Great aid to help with the setup of patients. These rulers start at "0 mm" from the edge. For reference only.

Sharpie® Markers

Fine point Sharpie Markers fast-drying, acid-free ink is ACMI certified non-toxic. (Sharpie markers are intended to be used for marking masks and shells, not for use in marking directly on skin.)

Alta Standard Package

Alta™ Multipurpose Device

Alta is an all in one solution that quickly adapts to a wide range of setups, reducing setup times.

TotalRT™ All in One Platform

The TotalRT All in One Platform is designed to quickly adapt positioning and immobilization solutions to your clinical setup and treatment needs. The platform is indexable on a couchtop, creating an affordable all in one solution and allowing seamless transition between patient treatments.

Alpine™ Stirrups

Alpine Stirrups are meticulously designed and feature an integrated rail clamp for easy attachment and enhanced anatomical access.

Applicator Clamp Holder

The Symphony Applicator Clamp Holder provides a safe and effective integrated solution to reduce applicator movement post-insertion. Post mounted or rail mounted versions accommodate various brachytherapy positioning workflows. Both holders are compatible with a wide variety of commercially available brachytherapy applicators. Compatible with CT and MR imaging.

BrachyGel™ Vaginal Hydrogel Packing

BrachyGel is a personalized packing solution for imageguided brachytherapy and the first of its kind. BrachyGel provides proven stability of brachytherapy applicators through treatment planning and delivery. Unlike gauze or a saline-filled balloon, it contours to the patient's anatomy and reduces air gaps.

Lithotomy AirShuttle

The patient is positioned once on the Lithotomy AirShuttle prior to insertion and then transferred easily, safely, and comfortably for imaging, treatment, and recovery.

Stirrups and SpringLoc Clamp

kVue Access 360 G2 Prone Breast Insert

Designed to allow breast cancer treatment for both left and right breast, including whole breast, partial breast and accelerated breast treatments. The sleek, cantilevered design provides both oblique and non-coplanar access, potentially enabling higher dose per fraction. Since the beam path is primarily through the breast with minimal couchtop interference, artifacts and scattering may be minimized.

kVue Virtual Indexing™

An array of white fiducial markers is placed down the center of the couch. The markers are located in line with the center of each indexing notch. A second array of fiducial markers are offset laterally to designate the superior or inferior location of the markers in relation to the indexing origin. This makes it easy to identify the indexing location on your image.

Access Prone G2 Breast Device

MR Safe and CT compatible to guide patients seamlessly from simulation through treatment. The lightweight construction of the Access Prone G2 makes it easy to set up. Foam padding increases patient comfort and a removable insert can be positioned for either left or right breast treatment. The easily interchangeable inserts provide flexibility to quickly change setups for treatment. These low-attenuating inserts have superior dosimetric profiles, which minimize skin reactions.

Access Prone G2 Breast Device

MR Safe and CT compatible to guide patients seamlessly from simulation through treatment. The lightweight construction of the Access Prone G2 makes it easy to set up. Foam padding increases patient comfort and a removable insert can be positioned for either left or right breast treatment. The easily interchangeable inserts provide flexibility to quickly change setups for treatment. These low-attenuating inserts have superior dosimetric profiles, which minimize skin reactions. Length: 2125 mm (83.66")

Access Supine & Access Supine MR

The Access Supine positions the patient's chest and thorax for external beam radiotherapy. The ladder system secures the backrest at various angles while the tailbone pad and bottom stopper comfortably support the patient for the duration of imaging and treatment.

Accessory Ladder Set

Accessory Ladder Set elevates the backrest to 20° & 25° angles for increased imaging and treatment options.

Aquaplast RT Thermoplastic Chin Strap

Aquaplast RT Thermoplastic Chin Strap is designed to be used with the Portrait Head Only Adapter for Access Supine Breast Devices to keep the patient's head out of the treatment field.

Arm & Wrist Supports

Independently adjustable Arm & Wrist Supports position the patient's arms out of the treatment field while exposing the chest for breast and nodal imaging and treatment. The ability to customize each patient's arm and wrist position also helps to increase comfort for patients with incisions while minimizing skin folds.

ArmShuttle™ Elite

The ArmShuttle Elite allows for full arms up positioning technique. The ribs of the shuttle index vacuum cushions and aid in ease of setup for daily treatments. The ArmShuttle Elite can affix to Access MR and Access Supine devices. It is possible to index directly to treatment couchtops for standalone use.

C-Qual Breastboard

The carbon fiber C-Qual Breastboard is lightweight, designed for patient comfort and features a low-attenuating IGRT treatment zone. The C-Qual's advanced features bring efficiencies to breast setup and treatment.

C-Qual M with Monarch Overhead Arm Positioner

The C-Qual M Breastboard features integration with the Monarch Overhead Arm Positioner, providing an efficient approach for arms-up positioning and allowing proper superior/inferior adjustment of the board to the patient which helps reduce patient slide.

Evolve Breastboard

The Evolve Breastboard is a lightweight solution that allows quick and simple indexing of many Wing Boards which aids in reproducibility without sacrificing patient comfort. Many hand grips, headrests, and thermoplastic options easily integrate to maximize positioning options based on patient or clinical need.

Evolve Breastboard Package

Includes Slant Board, Bottom Board, Bottom Stop, Pro Wing Board, Pro Handles and Gel Head Cup

Evolve Breastboard Package

Includes Slant Board, Bottom Board, Bottom Stop, Pro Wing Board, Pro Handles and Gel Head Cup

Evolve Slant Board

Evolve Slant Board, Bottom Board & Bottom Stop

Evolve Type-S Locating Kit

Includes Evolve Type-S Locating Bar and Slide Guide Three-Pin Lok-Bar for indexing to Alta or TotalRT All in One

Evolve Type-S Locating Kit

Includes Evolve Type-S Locating Bar and Slide Guide Three-Pin Lok-Bar for indexing to Alta or TotalRT All in One

Extended Wing Board

The Extended Wing Board is 22.5" (57 cm) wide, constructed of durable, lightweight ABS and can be used with a T- or U-Grip handle. Its extended length allows for additional arm positioning flexibility. It is CT and MR Safe and indexable for enhanced reproducibility from imaging through treatment. It easily attaches to the Evolve breastboard.

Gel Donut Headrests

Grip Options

Both the T-Grip and the U-Grip are available individually. Compatible with the Extended and Tapered Wing Boards.

Headrests

kVue Access 360 G2 Package

kVue™ Access 360 G2 Prone Breast Insert

Designed to allow breast cancer treatment for both left and right breast, including whole breast, partial breast and accelerated breast treatments. The sleek, cantilevered design provides both oblique and non-coplanar access, potentially enabling higher dose per fraction. Since the beam path is primarily through the breast with minimal couchtop interference, artifacts and scattering may be minimized.

kVue™ Access 360 G2 Prone Breast Insert

Designed to allow breast cancer treatment for both left and right breast, including whole breast, partial breast and accelerated breast treatments. The sleek, cantilevered design provides both oblique and non-coplanar access, potentially enabling higher dose per fraction. Since the beam path is primarily through the breast with minimal couchtop interference, artifacts and scattering may be minimized.

Monarch Overhead Arm Positioner

The Monarch Overhead Arm Positioner is 23.4" (59 cm) wide and features two hand grip designs; a one-piece M Handle or individual hand grips. Each option can be adjusted a total of 24 cm and the individual grips can adjust in 2.2 cm increments for customized placement of each hand/arm.

Monarch Thermoplastic Frame

Posicast thermoplastics are drape-style masks that require less stretching, therefore resulting in minimal shrinkage after cooling.

New Horizon™ Prone Breastboard

The New Horizon Prone Breastboard assists in providing accessible, comfortable, and reproducible patient positioning for prone breast treatments. The modular design and variety of accessories provide options for many prone breast setup challenges, allowing customized patient setups and meeting clinical needs for treatment.

Portrait Head & Shoulder Thermoplastic Adapters

Portrait Head & Shoulder thermoplastic adapters allow head and neck treatment for patients that are unable to lie flat. Portrait Head Only Adapter is supplied with mounting provisions for a chin strap.

Pro Wing Board

The Pro Wing Board is 23.4" (59 cm) wide and features Individual Hand Grips that are easily adjustable 24 cm on a track in 2.2 cm increments for customized placement of each hand/arm. Four headrest options (Gel Head Rest, Round Head Cup, Posifix Headrests, and Timo Headrests) are indexable in multiple positions.

Pro Wing Board Accessories

Silverman Adapter for Breast Devices & ArmShuttle

Easily indexes Silverman headrest for enhanced repositioning, accuracy, and patient comfort.

Standard Wing Board

The Standard Wing Board is 22.5" (57 cm) wide, constructed of durable, lightweight ABS and features Delrin post hand grips. It is CT and MR Safe and indexable for enhanced reproducibility from imaging through treatment. It easily attaches to the Evolve breastboard.

Thermoplastic Breast Adapter

This device increases functionality by providing the ability to attach thermoplastic sheets to the Access Supine. This increases reproducibility of breast positioning for treatment. The device works in conjunction with 14" Opti-Handles to secure thermoplastics to the Access Supine.

Thermoplastic Chin Strap

Aquaplast RT Thermoplastic Chin Strap is designed to be used with the Portrait Head Only Adapter for Access Supine Breast Devices to keep the patient's head out of the treatment field.

Thorawedge™

The Thorawedge is a unique positioning device allowing the patient to incline at multiple fixed angles, creating a comfortable position during diagnostic procedures. The Thorawedge was co-developed with the Department of Radiotherapy of the University Medical Center in Utrecht, The Netherlands.

Treatment Brassiere

The Treatment Brassiere reshapes the ipsilateral breast more favorably for radiation treatments while moving the contralateral breast away from the beam. A complete library of 40 brassiere cups is available, with or without a portable storage caddy. Also available individually or in sets of five.

Wing Board Vac-Lok

Wing Board Vac-Lok creates a rigid and secure support around the patient when a vacuum is drawn through a self-sealing quick-release valve.

COUCHTOP PADS

Couchtop Service Panel

Mounts on any kVue Couchtop or couchtop with Varian Style Indexing to protect the couchtop surface during service or maintenance. This product is transparent.

CT Overlays

Carbon fiber one piece overlays securely lock onto a cradle, providing a surface consistent with treatment couchtops. They are lightweight and durable, allowing them to be easily removed or reinserted for use on imaging machines.

CT OVERLAYS

Elekta Style Locating Bar

Locating bar for Elekta style indexed couchtops.

End Plates for Varian

Allows for use of QA devices

Exact® Lok-Bar

The Exact Lok-Bar with 14 cm spacing is for use with Exact or Interloc style indexed couchtops.

Interloc® Lok-Bar

The Interloc Lok-Bar with 14 cm spacing is for use with Interloc style indexed couchtops.

kVue 1610 mm Standard Insert

A versatile, homogeneous insert for enhanced imaging and treatment. It is the optimal choice for for proton therapy.

kVue Bos Inserts

Specifically designed to meet the unique requirements of proton therapy for patient immobilization and beam transmission. It is engineered to rigidly support the patient without using a flat base that blocks the use of proton beam angles. See page 205 for more information.

kVue Couchtop

KVUE COUCHTOPS

kVue DoseMax™ Insert

Low electron generating insert combines the rigidity of a solid panel insert with skin-sparing properties comparable to a grid panel insert.

kVue Encompass SRS Insert

A highly specialized, non-invasive immobilization solution for stereotactic radiosurgery. Encompass is validated for use with Varian HyperArc. See page 71 for more information.

kVue Insert Docking Plate

Provides greater flexibility for standardizing the use of kVue Inserts in multiple modalities through the use of this docking plate and two pin locating bars.

kVue Low-e™ Insert

A low electron generating, homogeneous insert for enhanced imaging and treatment. It is the optimal choice for a wide range of radiotherapy treatments.

kVue One Couchtop

The kVue One Couchtop is a one-piece modular design with a homogeneous composite base and no moving rails. It offers the ability to interchange treatment specific kVue inserts that mount directly into the top surface of the couch through the One Touch Latch. The light weight kVue One is compatible with versions of 6 Degrees of Freedom (DOF) linear accelerators and robotic bases. (5 mm WET without kVue Insert)

kVue Portrait Intracranial, Head & Neck Insert

Provides superior immobilization for a variety of brain and head and neck radiotherapy treatments. See page 91 for more information.

kVue Pronumbra Insert

The next generation of proton head & neck immobilization is here. The Pronumbra system's conformal design ensures the most effective treatment beam angles. Pronumbra offers stunning improvements compared to the legacy BoS system. See page 203 for more information.

kVue Short Insert

A shorter flat panel insert that allows the kVue to be retracted so that extended head and neck devices can be placed at isocenter.

kVue Universal Tip Insert

Allows mounting of quality assurance and treatment devices and provides universal mounting capability for some Varian Exact® style tip accessories.

Locating Bar

This Locating Bar is compatible with Varian Exact Style indexing including kVue Couchtops and Alta Multipurpose Device.

Locking Locating Bar

This Locating Bar is compatible with Varian Exact Style indexing including kVue Couchtops and Alta Multipurpose Device.

LOK-BARS AND LOCATING BARS

MR Lok-Bar

MR Lok-Bars allow indexing of positioning devices to a MRI couchtop. Always refer to product labeling to identify whether a device is MR Safe or MR Conditional.

MR Safe Locating Bar

This Locating Bar is compatible with Varian Exact Style indexing including kVue Couchtops and Alta Multipurpose Device.

Patient Handles

Clamp to the Universal Couchtop, providing a stable place for immobilized patients to place their hands.

Posifix Extensions

Allows for direct attachment of Solstice SRS and Solstat Immobilization Systems and Posifix Thermoplastics.

Prodigy Lok-Bar

The Prodigy Lok-Bar with 14 cm spacing is for use with Prodigy style indexed couchtops. The Slim Prodigy Lok-Bar features smaller side profiles.

Prodigy™ 2 Lok-Bar

The Prodigy 2 Lok-Bar with 7 cm spacing is for use with all Universal Couchtops and TotalRT Platform.

ProForm Extension

Designed for the unique requirements of proton therapy. May also be used for photon treatment. Additional lengths available, see page 209.

QA Locating Bar

Compatible with Varian Geometric Phantom.

QUANTUM™ CT Overlays

QUANTUM CT Overlay, a flat, indexed surface for RT simulation, offering precise positioning and Varian Exact Indexing. It is thin, lightweight, and narrower than most overlays, providing increased usable bore space. The carbon fiber skin and foam core construction ensure minimal artifacts and superior imaging quality.

Slide Guide Lok-Bar

The Slide Guide Lok-Bar does not lock down to the indexing points along the couchtop but slides longitudinally along the couchtop. It is designed to prevent lateral movement and is useful for longer devices such as bellyboards, breastboards and Vac-Lok Cushions, which contract during forming.

Slide Guide Two-Pin Lok-Bar

The Slide Guide Two-Pin Lok-Bar slides longitudinally along the Universal Couchtop profile without being limited to any indexing points. It is designed to prevent lateral movement and is useful for longer devices such as bellyboards, breastboards and Vac-Lok Cushions, which contract during forming.

SofTouch Couchtop Pads

Supportive and comfortable for patients during a variety of radiotherapy procedures. They are available in multiple lengths and thicknesses.

Transverse Locating Bar (Sliding)

The two indexing pins can be offset by 100 mm either left or right for increased flexibility of positioning an immobilization device and accessory setup, which is ideal for breast and SBRT treatment setups. They are compatible with Varian Exact Style indexing including kVue Couchtops and Alta Multipurpose Device.

Transverse Lok-Bar

The Transverse Lok-Bar allows for lateral movement of the two-pin system across the couchtop, providing more options in positioning the patient on the couchtop. The Transverse Lok-Bar is available in Prodigy, Prodigy 2, Interloc, PinnPoint™, Exact and Medical Intelligence indexing styles.

Type-S Extensions

Allows for direct attachment of Solstice SRS and Solstat Immobilization Systems and all Type-S Thermoplastics, including the ClearVision open face mask designed for use with vision/camera systems. 49.1" and 53.1" Extensions do not have a central Vac-Lok point, therefore provides a larger unobstructed treatment region.

UCT Head Extension

Secures to any UCT via a Prodigy 2 Lok-Bar allowing an additional 17 cm of treatment area.

Universal Couchtop 1 Piece

The Universal Couchtop 1 Piece is an ideal IGRT and SBRT solution with a uniform design and no junctions. This couchtop offers a dosimetricaly matched couchtop for most major CT and LINAC models.

Universal Couchtop Long Extension

UNIVERSAL COUCHTOP LONG EXTENSION AND 1 PIECE

Varian MPC IsoCal Phantom Mount

CQ Medical kVue & QUANTUM

CQ Medical kVue & QUANTUM CT Overlays

Elekta/Medical Intelligence I-Beam and Tomotherapy

Tomotherapy Adapter

Varian Exact compatible CT

Varian Exact Couchtop

Varian Exact IGRT Couchtop

Accusyte

The Accusyte 3D Fiducial Marking System marks the planes of a soft tissue cavity after a tumor has been removed. The fiducial sutures are used when soft tissue needs to be marked for future medical procedures, such as subsequent radiation therapy. After a biopsy or tumor removal, the Accusyte fiducial sutures are sewn around the perimeter of the tumor bed at the anterior, posterior, middle, and lateral planes of the tumor cavity. The fiducials allow for accurate delineation of target volumes during treatment planning and assist with image guided radiation therapy (IGRT) before each session. The fiducial markers are woven within an absorbable suture. When the body absorbs the suture, the fiducial markers remain within the tissue. Migration of the markers from their original position is unlikely, as the tissue produced during the healing process holds the markers in place. Each package contains six sutures, which are sewn into place using the same technique as other sutures commonly used.

Align

Align Markers are 10 mm long to accommodate localization software systems that utilize linear fiducials as opposed to multiple segment points.

BioXmark Liquid Fiducial Marker

The liquid nature of BioXmark enables implantation of multiple markers of varying sizes in the same uninterrupted procedure. Following implantation, sticky and soft markers form, adapting to the surrounding tissue* and remaining visible under relevant imaging, including MRI. BioXmark markers are non-metallic and have low levels of artifacts and low-dose perturbation. These qualities support precise treatment planning and image-guided treatment, including proton therapy. Achieve CT and MRI image acquisitions while ensuring streamlined workflows and low risk of complications, all without specialized equipment.

Bone Markers

Bone Markers are 99.9% pure gold 2 mm spheres recommended for head and neck applications. They are typically placed in a small hole in the bone and sealed with bone wax, with minimal marker migration.

Coupled Markers

Coupled Markers are 3 mm long with either 0.8 or 1.0 mm diameters attached at a fixed distance, 20 mm apart from center to center. They are secured with a sterile, tissue-absorbable material. This ensures that the markers are implanted at a known distance for calculating precise localization.

CyberMark

CyberMark Markers were developed specifically for use with Accuray's CyberKnife robotic radiosurgery system. The gold marker measures 5 mm long and 1 mm in diameter, as specified in the CyberKnife software.

FlexiCoil™

The FlexiCoil Marker is a unique, non-migrating marker with solid end points. FlexiCoil provides a unique image with two nodes that clearly define the end points.

FlexiMarc™ G/T

The FlexiMarc G/T Marker provides distinctive non-biological projection with easily definable nodes. The gold nodes are connected with a fine titanium line, which creates the optimal performance characteristics and visualization.

FusionCoil SBRT Kit

Cartridge Kits reduce the number of needle passes and minimize the chance of Edema or Pneumothorax.

FusionCoil™

The FusionCoil Marker images equally as well in CT as it does in MRI. It consists of an open spiral gold coil with a special biocompatible alloy core that appears as a solid black dot in MRI. This is the first of its kind, providing superior reference for image fusion as well as precise IGRT.

Gold Soft Tissue Markers

Gold Soft Tissue Markers are 99.9% pure gold cylinders specially knurled to inhibit migration. They are 3 mm long and 0.8, 0.9, 1.2 or 1.6 mm in diameter. They are available loose or in sterilized preloaded needles.

PointCoil SBRT Kit

Cartridge Kits reduce the number of needle passes and minimize the chance of Edema or Pneumothorax.

PointCoil™

The PointCoil Marker is a 5mm long helical coil that provides a single unique point for IGRT. The helical design maximizes stability and minimizes artifact.

PolyMark™

The PolyMark Marker is the first biocompatible polymer-based marker. It minimizes artifact, is visible using kV based IGRT solutions, MRI and is optimized for Proton Therapy.

Suture-Type Markers

Suture-Type Markers are designed for high accuracy breast tumor localization. The 99.9% pure gold spheres with small central holes are readily sutured in place to provide a permanent localization solution. They are prethreaded on absorbable sutures.

Foam Positioners

These foam positioning aids are encased in blue vinyl fabric. They are designed for optimal durability and comfort and can easily be cleaned and reused.

AccuForm Cushions

AccuForm Positioner

An AccuForm Positioner can be used for indexing an AccuForm cushion to Uni-frame and Type-S baseplates.

AccuForm Shim

The AccuForm Shim is a flexible, thin foam piece that provides a small height offset above the customized patient AccuForm. The shim is intended to be placed onto the formed AccuForm cushion, and prior to forming the thermoplastic mask.

AccuForm™ Cushions

AccuForm Cushions are ideal for high-precision head and neck treatments when enhanced comfort, stability and repositioning accuracy are key.

Aquaplast RT Thermoplastics

Customizable Head Support

The Customizable Head Support is a shell and customizable cushion system. The unique shape of the shell was designed to encourage the cushion to return the patient to a repeatable position from fraction to fraction.

GrayDuck Dart™

The GrayDuck Dart is an improved version of GrayDuck Stent, offering a significantly smaller and easier-to-use stent while retaining the same level of customization as described above.

GrayDuck Stent™ Oral Positioning Device

GrayDuck Stent and GrayDuck Dart are currently the only custom fitted bite block systems that can position the tongue in one of several positions; laterally (left or right), depressing (downward) or a combination thereof.

Head Support

Compatible with Type-S and Posifix Extensions, Baseplates and Overlays.

Headrests

Headrests

IntegraBite™

The IntegraBite bite plate provides repeatable positioning and decreases patient head and neck rotation, flexion, and extension. The simple and streamlined design makes application and insertion easy.

kVue Portrait Intracranial, Head & Neck Insert

Portrait devices and masks provide a high level of stability by limiting patient motion and reducing the probability of positioning errors. The Portrait Insert can be extended beyond the end of the couchtop making it ideal for full 360° treatments. Portrait accommodates supine and prone setups for patient specific treatments. Portrait is rigid while providing minimal attenuation.

Precise Bite

Precise Bite™

The Precise Bite attaches easily to a thermoplastic cast and conforms to the teeth and/or maxilla to aid in effective and repeatable positioning. The Precise Bite with tongue depressor assists in tongue displacement and provides an airway opening for easy breathing.

Shims

Shims are for use with headrests and systems.

Shoulder Retractor

The Shoulder Retractor is often used with thermoplastic-based fixation systems. Retraction is especially beneficial for shoulder clearance when opposing lateral fields are used to treat the neck.

Silverman Headrests

With a Silverman, no transmission correction is necessary for most high-energy beams. Silverman headrests can be purchased individually or in a set of six.

Solstat™ Immobilization System

The Solstat system is comprised of a rigid head support, customizable cushion or non-custom headrest and a dedicated thermoplastic mask designed for secure and simple attachment. These components create a highly customizable, comfortable and rigid setup for accurate head and neck treatments.

Universal Couchtop Long Extension

The Universal Couchtop Long Extension self-locks onto the Universal Couchtop, allowing the thermoplastic to connect to the couchtop.

Varian Style Extension

The Varian Style Extension hooks easily on the superior end of a Varian style endplate. An optional reloadable head, neck & shoulder frame for Type-S thermoplastics is available.

Extended Head Stop Headrests

The Extended Head Stop Headrests help encourage patients to return closer to the same position from treatment to treatment by providing a cranial stop as a reference for where to place their head.

Posifix Contoured Headrests

The Posifix Contoured Headrests feature colored bottoms for easy identification and are wider and higher than the standard Posifix supine headrests, completely surrounding the back of the head. This design is intended to encourage less lateral, longitudinal and rotational movement during setup and treatment.

Posifix Pediatric Headrests

Designed for use with pediatric patients. Both the prone and supine headrests are available in bright, glossy colors.

Posifix Prone Headrest

The Prone Headrest is specially designed for treatments with the patient in the prone position. The 3-D shaped contour supports chin and forehead and therefore, assists in creating a reproducible and comfortable position.

Posifix Supine Headrests

Posifix headrests are made of low density polyethylene foam.

Posifix Wide Headrest

A special wide headrest, made of low density polyethylene foam, is available in a natural position design.

Prone Head Cushion & Adapter

Designed to support the patient's head while in the prone position. The contoured shape supports the chin and forehead providing comfortable and reproducible positioning. The Head Cushion Adapter allows the Prone Head Cushion to be mounted to any device that uses Silverman locating pins.

Spacers & Wedges

Spacers & Wedges are available in a variety of heights and angles for use with the Posifix Patient Positioning System to provide positioning offset of the patient for unique treatment needs. They can accommodate the use of all Posifix style headrests, Extended Stop Headrest, Posifix Customizable Head Support and Posifix Individual Head Support in MR, CT, and treatment environments.

Timo Headrests

Timo headrests are constructed of durable polyurethane foam with a washable coating. Six various heights and contours offer a comprehensive range of neck angulations. They are available plain or with Lexan plates for use with Uni-frame baseplates and Wing Boards.

Alta Multipurpose Device for Pelvis

Alta allows positioning and immobilization of patients for pelvic applications through the use of pelvis thermoplastics and other pelvic positioning products. FlexLock accessories can be used to increase patient comfort and make fine positioning adjustments.

ALTA PELVIS THERMOPLASTIC

Aquaplast RT Aqua-Brief

The pelvis thermoplastic series is compatible with the Alta Multipurpose Device and the Carbon Fiber Pelvis System. These thermoplastics allow for the immobilization of the pelvis region. The system flattens the lower lumbar for added comfort and repeatability. Aquaplast RT is available in 2.4 mm and 3.2 mm thickness.

Aquaplast RT Aqua-Brief Thermoplastic

Carbon Fiber & MRSeries Bellyboards

The Carbon Fiber Bellyboard assists in reducing the volume of the small bowel that is irradiated in patients undergoing treatment in the pelvic region. The contoured opening allows for displacement of the small bowel, as the central support structure assists in compressing the small bowel forward into the opening.

Combifix™ 3 and Feetfix Couch Support

The Combifix 3 combines the Kneefix and Feetfix, providing enhanced positioning for the pelvic region and other lower extremities. The Feetfix Couch Support may be used separately and positions the Feetfix at indexed positions, allowing the Feetfix to be tilted at four different angles. Both the Combifix & Feetfix are two- and three-pin Lok-Bar indexable. Shoulder retractors are available to pull the shoulders down during radiotherapy simulation and treatment sessions where opposed lateral fields are used in the neck area. They can attach in five positions on the Feetfix.

Dual Leg Positioner

The Dual Leg Positioner quickly captures the lower legs for supine hip and pelvic treatments. It holds the legs at the same level, reducing pelvic rotation. An optional Velcro® strap secures the calves and ankles. The positioner is indexable for enhanced reproducibility and can be easily cleaned and reused.

ENDORECTAL BALLOON

Feetfix 3

The Feetfix 3 is a universal patient support cushion for radiotherapy and diagnostic procedures and has been designed to provide comfortable positioning with enhanced immobilization. The Feetfix 3 is 16 cm tall and is made of lightweight, closed cell foam that is easy to clean. It can be used with either a two- or three-pin indexable Lok-Bar or with the Feetfix Couch Support (page 153).

FLEXLOCK KNEE & FOOT SUPPORTS

FlexLock™ Knee & Foot Supports

The FlexLock supports offer customizable indexing options for positioning the lower abdomen, pelvis, and lower extremities. The knee support allows for precise superior-to-inferior adjustments while the patient is in position, features integrated height adjustability, and is easy to clean. Additionally, the foot support can be angled for patient comfort.

HipFix® Immobilization System

The HipFix hip and pelvis immobilization system utilizes a single sheet of thermoplastic over the entire abdomen and pelvis region, providing immobilization for fixed fiducial targeting. The versatile system accommodates both prone and supine patient setups.

Kneefix 3

The Kneefix 3 cushion contributes to better stability and reproducibility in the supine position, regardless of the target area. It promotes patient comfort and is therefore ideal for use during lengthy procedures on rigid surfaces. The Kneefix 3 is 16 cm tall and is made of lightweight, closed cell foam that is easy to clean and is both two- and three-pin indexable. A Low Kneefix 2 (12 cm) is available for additional setup.

Kneefix 3 Elevation Blocks

The Kneefix 3 Elevation Blocks can elevate the Kneefix 3 by 5 cm. The Kneefix fits in the topside of the elevation block and will not slide off. Elevation Blocks may be stacked to raise the legs even higher. The Kneefix 3 Elevation Blocks are both two- and three-pin indexable.

MultiFix™

The Multifix is a versatile system designed to secure arms and legs in straight or bent positions using small Posicast precuts. These precuts can be easily molded to fit anatomical contours and are then attached to the baseplate at clearly marked positions. The indexable baseplate ensures a reproducible setup, with four sets of indexing holes providing an isocentric position for the treated extremity, regardless of its placement on the Multifix.

POSITIONING CUSHIONS

Pron-Pillo™ Cushion

The Pron-Pillo provides comfort and stability for patients in the prone position. The cushion can be easily cleaned and reused.

Prone Thorax Support

The Prone Thorax Support is designed to relieve chest compression during treatments in the prone position. It can be used as a stand-alone patient support or as an option on the Bellyboard to allow large patients to be treated in the prone position.

Prone-Lok™ Cushion

The Prone-Lok Positioning Cushion enhances patient comfort through its specially designed foam construction. Its contoured corners eliminate shoulder impingement. The center portal opens the patient's field of view, improving patient comfort. The cushion is indexable and can be easily cleaned and reused.

Shoulder Retractor Strap

Designed to pull the shoulders down during simulation and treatment, this accessory is compatible with FlexLock and SofTouch Knee and Foot Supports.

SofTouch™ Elite Bellyboard

The SofTouch Elite Bellyboard is an adjustable stabilization platform designed to position the lower bowel away from the treatment field during prostate radiotherapy. It features a removable caudal cushion and separate belly support cushions for a customized patient setup. The bellyboard, made from unique semi-firm radiolucent foam, provides repeatable positioning and is contoured to relieve pressure points, enhancing patient comfort. Multiple cushion configurations allow for optimal anatomical placement of both external and internal anatomy, leading to improved clinical outcomes.

THERMFIX & HIPFIX IMMOBILIZATION SYSTEMS

ThermFix & HipFix Thermoplastics

Thermoplastics are 18" x 22" (45.7 cm x 55.8 cm) and available with reloadable or disposable handles with solid, standard perforated or IMRT Reinforced perforation styles. The handles and groin piece secure to the device, providing an indexable setup.

ThermFix Base Package

Includes: Superior Bar, Inferior Bar, Spacing Tool (for breast, thorax, abdomen, hip and pelvic treatment with no central docking)

ThermFix Complete Package

Includes: Superior Bar, Inferior Bar, Hip & Pelvic Bar, Spacing Tool

ThermFix Pelvic Package

Includes: Superior Bar, Hip & Pelvic Bar, Spacing Tool (for hip and pelvic treatment with central docking)

ThermFix™ Immobilization System

The ThermFix Immobilization System uses a single sheet of thermoplastic that forms over the breast, thorax, abdomen, hip, or pelvis to aid patient positioning and reproducibility. The ThermFix Bars easily attach and index to the TotalRT All in One Platform or Universal Couchtop and provide 1 cm indexing.

Head, Neck & Shoulders (4-Point)

Head, Neck & Shoulders (5-Point)

L-Profile Thermoplastic Masks

These masks allow for 3-point and 5-point immobilization utilizing a L-Profile design which locks into the device via the L design. They are available in Aquaplast RT and Fibreplast material in 2.4 mm and 3.2 mm thicknesses.

Alta Multipurpose Device

Alta is an all in one solution that quickly adapts to a wide range of setups, for a more user friendly and ergonomic experience.

Elekta Unity MR-LINAC Two-Pin Lok-Bar

Encompass 15-Channel Head Coil for MR Imaging

The Encompass 15-Channel Head Coil is specially designed to accommodate the high-precision positioning unique to the Encompass MR SRS Immobilization System. The adjustable coil geometry locates the coil elements within millimeters of each patient's unique anatomy providing an optimized signal-to-noise ratio and delivering imaging information to support accurate SRS treatment planning when used with the Encompass MR SRS Immobilization System. Immobilization in the Encompass SRS System offers motion reduction for increased visualization of fine details, reducing the need for repeated scans. MR images obtained with the Encompass SRS System can be used for SRS treatment planning, including MR-Only and MR Fusion Techniques. Please note: Encompass Coil is used with the Encompass MR Device for Imaging Only. Encompass Coil is not for Treatment. The Encompass Device can be used for both imaging and treatment.

Encompass SRS MR Standalone Device

INSIGHT MR Overlay (FREE.MAX SCANNERS)

INSIGHT MR Overlay and the Coil Holder are designed to enable MR imaging in the same position as treatment.

INSIGHT MR Overlay & Coil Holders

INSIGHT MR Overlay and Coil Holders are designed to enable MR imaging in the same position as treatment, supporting MR/CT fusion techniques as well as MR only.

MR Lok-Bar

MR Lok-Bars allow you to index MR Safe or Conditional devices to your MRI overlay.

Overlays

MRI overlays are made of fiberglass with a foam core, have Prodigy and Interloc indexing options and are compatible with MR Lok-Bars.

TotalRT All in One Platform

The TotalRT All in One Platform is designed to quickly adapt positioning and immobilization solutions to your clinical setup and treatment needs. The platform is indexable on a couchtop, creating an affordable all in one solution and allowing seamless transition between patient treatments.

Universal Couchtop MRI Overlays

Universal Couchtop MRI Overlays are made from fiberglass and feature Prodigy 2 indexing in 7 cm increments. Universal Couchtop is available on most major CT, MR, Proton and LINAC models to provide seamless transfer from imaging to treatment.

Comfort Marker 2.0 Patient Marking System

Improve your patient's radiotherapy journey and gain clinical efficiencies with the Comfort Marker 2.0, developed by Medical Precision B.V. This revolutionary reference point device brings a new level of comfort to the start of the patient's radiotherapy treatment. The easy-to-use system is designed specifically for use in radiotherapy using technology popular within the permanent make-up industry. The device is carefully engineered to apply reference marks with gentle and controlled depth placement, resulting in less painful tattooing to help keep the patient relaxed and cooperative throughout the process.

InkAlign

InkAlign is a sterile, single-use medical tattooing product with a pen-like design that provides standardized administration of radiation therapy tattooing. The ink applicator comfortably rests in the technician's hand for easy control of ink flow during application to skin. InkAlign is available in packs of 25 sterile single-use devices with 21 gauge needles in UV pink or black ink. A box of 10 sterile single-use black ink droppers is also available (needles not included).

Powermark

Powermark markers maintain the advantages of Suremark markers and feature larger lead ball sizes for visibility in radiation therapy.

Suremark

Suremark markers are useful in distinguishing between a nipple shadow and lesion.

Suremark Tabs

Suremark Tabs maintain the advantages of the Suremark markers with an added tabbed feature.

Suremark Wire

Suremark Wire is used for marking scar tissue, outlining palpable nodules, moles and entry points in CT scans.

Pediatric ProForm Overlays

The ProForm CT & Photon Treatment Overlay and MR Overlay allow for CT simulation or MR imaging of patients who will be treated on the Universal Couchtop ProForm Extension, allowing seamless transition from simulation to treatment.

Universal Couchtop Pediatric ProForm Extension

The Universal Couchtop Pediatric ProForm Extension self-locks onto the Universal Couchtop, allowing the thermoplastic to connect to the couchtop.

ClearVision 2

FreedomView IMRT Reinforced Style 18

IMRT Reinforced Style 18

Registration Film

Standard Perforated

Portrait™ with Integrated Shim™

The innovative Integrated Shim allows independent height adjustment at each pin, providing completely customizable immobilization. Each Integrated Shim can be adjusted in discrete 0.5 mm increments, with a total range of 4 mm.

Head, Neck & Shoulders Baseplates

Carbon fiber or Acrylic Posifix baseplates for head only and head, neck and shoulder fixation.

iBEAM® Overlay Adapter

Created for the Medical Intelligence iBEAM and iBEAM EVO couchtops. The overlay is cantilevered, providing minimal attenuation in the area of treatment.

Posifix Variable Axis Baseplate

The Variable Axis Baseplate integrates with any Posifix extension, overlay or baseplate to provide a tilting movement with patient fixation in either prone or supine positions. The unique variable axis design allows for natural head and neck movement and features a rotating knob to lock the baseplate into an angle position from 0°–30° in supine position and 12.5°–32.5° in prone position. The baseplate accommodates Posifix head only thermoplastics and accepts all supine and prone Posifix headrests (sold separately).

Universal Couchtop Long Extension

The Universal Couchtop Long Extension self-locks onto the Universal Couchtop, allowing the thermoplastic to connect to the couchtop.

Varian Style Extension

The Varian Style Extension hooks easily on the superior end of the Varian style endplate. Like the Universal Couchtop extensions, this extension allows for 360° treatment of the head and neck with minimal attenuation.

Chin Strap Thermoplastic

Fibreplast & Aquaplast RT, Head Only (3-Point)

Fibreplast & Aquaplast RT, Head, Neck & Shoulders (5-Point)

Posicast Microperfo Plate

Micro perforation, fuzzy coating on one side. 43 x 92 cm, 2.3 mm thick, Qty 10.

Posicast, Head Only

Posicast, Head Only, Open-face

Posicast, Head, Neck & Shoulders

Posicast, Pediatric

For more pediatric options, see page 111.

Shoulder Thermoplastic

Leg Roll Positioner

Quality foam cushions are durable for everyday use and will maintain consistent shape and patient comfort. Colors may vary.

Multi-Purpose Support Cushions

Multi-Purpose Support Cushions are exclusive closed cell PE foam that will not stain or absorb liquids. They are more firm than regular, coated support cushions. Five different shapes are sold separately or as a complete set, which also includes a Hand/Finger Positioner.

RediFoam™ Two-Part Positioning Foam

RediFoam two-part positioning foam is both CFC- and TDI-free. You can make setup marks directly onto RediFoam for verifiable repositioning throughout treatment.

Shoulder Support Cushion

The Shoulder Support Cushion is a wedge shaped cushion designed to support the shoulders and upper body of the patient. When placed over the Posifix-1 or -2 baseplate, the contours of the baseplate hold the cushion firmly in place.

AccuForm Cushion

AccuForm Cushion

AccuForm Cushions

BoS Accessories

BoS AirShuttle for use with Symphony AirDrive System

A Symphony solution combines an AirShuttle positioning & transfer device with an AirDrive system to provide smooth patient transfers for imaging and treatment applications. Designed for proton therapy, the conformal shape of the BoS AirShuttle optimizes the penumbra and minimizes the blockage of important proton beam angles. When utilized alongside the Symphony AirDrive System, it facilitates seamless patient transfers for imaging and treatment procedures.

BoS AirShuttle Packages

Both packages include: AirShuttle Transfer Handles (x2), AirShuttle Locating Bars (x2), BoS Air Bearing (Spare)

BoS Headframes

The BoS Headframe is engineered to rigidly support the patient without using a flat base that blocks the use of important proton beam angles. The BoS MR Headframe enables enhanced imaging in both CT and MR while also facilitating the use of CT fusion techniques.

BoS Inserts

kVue BoS inserts are specifically designed to meet the unique requirements of proton therapy for patient immobilization and beam transmission. The BoS device is engineered to rigidly support the patient without using a flat base that blocks the use of important proton beam angles. The conformal shape is designed to minimize the distance between the patient and the field defining aperture, optimizing the beam proton penumbra. kVue BoS inserts are available in two additional lengths. The shorter version which is required to treat vertex fields in some robotic couch setups and a longer version that is required to treat lower spinal fields on tall patients.

BoS Thermoplastics - Head & Neck, 24 cm wide for smaller patients

Masks on this page are disposable and sold in Qty 1. Must purchase in multiples of 10.

BoS Thermoplastics - Head & Neck, 26 cm wide, 3.2 mm

Masks on this page are disposable and sold in Qty 1. Must purchase in multiples of 10.

BoS Thermoplastics - Head & Neck, 31 cm wide, 3.2 mm

Masks on this page are disposable and sold in Qty 1. Must purchase in multiples of 5.

BoS Thermoplastics - Head & Neck, 38 cm wide, 3.2 mm

Masks on this page are disposable and sold in Qty 1. Must purchase in multiples of 5.

BoS Thermoplastics - Head & Neck, Head & Shoulders, 3.2 mm

Masks on this page are disposable and sold in Qty 1. Must purchase in multiples of 10.

BoS Thermoplastics - Head & Shoulders, 43 cm wide, 3.2 mm

Masks on this page are disposable and sold in Qty 1. Must purchase in multiples of 5.

BoS Thermoplastics - Head & Shoulders, 48 cm wide, 3.2 mm

Masks on this page are disposable and sold in Qty 1. Must purchase in multiples of 5.

ClearVision 2

ClearVision 2

Extensions

Additional ProForm Extension lengths are available. Contact your sales representative for more information.

Fibreplast with Integrated Shim Thermoplastics

FreedomView Reinforced Style 18

FreedomView Reinforced Style 18

Hitachi Ltd.

Compatible solutions available. Contact Hitachi for information.

IBA Systems Proteus® ONE and Proteus PLUS

Includes Rectangular Extension (MTIL6673) and Prodigy 2 Lok-Bar. Large treatment area of 58.9" (149.7 cm).

InfinityLock™ Hand Grips

kVue One Proton Couchtop

The kVue One Proton Couchtop is rigid, lightweight and specifically designed for use with a robotic couch, which is frequently used in proton therapy applications. The versatile kVue platform provides a wide range of positioning and immobilization options for treating tumors of varying complexities.

kVue Portrait Proton System

kVue Pronumbra Head & Neck System

The device's conformal design, combined with customizable patient positioning options, optimizes the proton beam penumbra, and maximizes treatment angles to achieve the best possible outcomes.

kVue Proton Couchtop

The kVue Proton Couchtop is specifically designed for use with robotic couches.

Locking Locating Bar

Mevion Medical Systems S250™ Series

Includes Rectangular Extension (MTIL6660) and Prodigy 2 Lok-Bar. Large treatment area of 47.1" (119.7 cm).

Overlays

The ProForm CT & Photon Treatment Overlay and MR Overlay allow for CT simulation or MR imaging of patients who will be treated on the Universal Couchtop ProForm Extension, allowing seamless transition from simulation to treatment.

Pediatric ProForm Thermoplastics

Masks are sold in boxes of 5 and are disposable. ProForm Thermoplastics are made from Aquaplast RT material.

Portrait Accessory

Portrait Proton Insert

The kVue Portrait Proton insert is ideal for proton craniospinal radiotherapy treatments where whole brain lateral fields are combined with PA spine fields.

ProForm Head & Neck Immobilization

The Universal Couchtop ProForm Head & Neck Extension features geometry that allows for direct access to effectively treat CNS patients. ProForm accepts a dedicated thermoplastic mask designed to meet the unique requirements of proton therapy.

ProForm Thermoplastic

Masks are sold in boxes of 5 and are disposable. ProForm Thermoplastics are made from Aquaplast RT material.

Pronumbra Neck Support

Pronumbra Shoulder Adapters

Rectangular Extension

Registration Film

Registration Film

Reinforced Style 18

Reinforced Style 18

Reinforced Style 18 with Hair Openings

Shoulder Thermoplastic Docking

Two shoulder docking options are available; standard top docking and underneath docking to accommodate for larger patients where additional stretching of thermoplastic may be required. Not available for pediatric.

Solid With Perforated Nose

Standard Perforated

Standard Perforated

Universal Couchtop Long Extension

The Universal Couchtop is a modern and comprehensive solution for enabling advanced treatments in your clinic. Specifically designed to answer the demands of Proton, the Universal Couchtop Long Extension contains no rails or junctions in the treatment area to help facilitate better dose delivery and target coverage.

Dry Heat Oven/Waterbath Stand

The stainless-steel Dry Heat Oven/Water Bath Stand is an efficient way to store or transfer a dry heat oven or water bath in and between treatment rooms. The stand can be changed to a mobile cart by assembling a set of four lockable casters.

RapidHeat Hot Air Oven

Quickly reaches working temperatures and provides an easy-to-use method to heat thermoplastic masks as well as Aquaplast RT thermoplastic sheets and pellets. Its unique two fan design and optimal spacing between racks allows the hot air to soften the thermoplastic quickly and evenly. RapidHeat has a large 75 mm high digital display that features a Quick Start Guide to easily navigate operating the oven. The digital temperature controller can be used in a programmable or manual timer mode, increasing workflow efficiencies.

Alta Multipurpose Device

Alta is an all in one solution that quickly adapts positioining and immoblization solutions to your clinical setup and treatment needs, including hypofractionation.

Body Pro-Lok ONE System

Body Pro-Lok ONE System provides a customizable and reproducible solution for complex SBRT patient setups.

Elekta iBEAM® evo Couchtop

ONEBridge and ONE Respiratory Belt are compatible via a special adapter that allows for 1 cm indexing to iBEAM evo couchtops.

kVue™ One Couchtop Low-e™

The kVue One Couchtop is a one-piece modular design with a homogeneous composite base and no moving rails. It offers the ability to interchange treatment specific kVue inserts that mount directly into the top surface of the couch through the One Touch Latch. The light weight kVue One is compatible with versions of 6 Degrees of Freedom (DOF) linear accelerators and robotic bases. kVue Couchtops are avialble for LINAC and CT providing an environment in simulation that is reproducible and provides for more accurate dose planning and delivery.

ONEBridge

ONEPlatform

ONEPlatform provides a simple platform solution for complex SBRT patient setups.

Rails-Only System

The Body Pro-Lok ONE Rails-Only System provides compatibility of the Body Pro-Lok ONEBridge and ONE Respiratory Belt on IGRT couchtops and CT overlays with Varian Exact indexing when avoidance of an overlay or platform is preferred. Bridges and accessories are sold separately.

Respiratory Belt

TotalRT Platform

TotalRT is an all in one solution that quickly adapts positioining and immoblization solutions to your clinical setup and treatment needs, including hypofractionation.

Universal Couchtop

The Universal Couchtop is a modern and comprehensive solution for enabling advanced treatments in your clinic. Specifically designed to answer the demands of IGRT delivery, the Universal Couchtop Long Extension contains no rails or junctions in the treatment area to help facilitate better dose delivery and target coverage. The Universal Couchtop is available for LINAC and CT, providing an environment in simulation that is reproducible and dosimetrically matched in treatment.

ArmShuttle Elite

Provides many head & arm positioning options in a lightweight and ergonomic design.

Clam-Lok™ Cushion

Forms to comfortably enhance immobilization from above.

FlexLock Knee & Foot Supports

Provides customizable indexing options for positioning the lower abdomen, pelvis, and lower extremitites.

Infinity Lock and Grip Set

Patient handles provide a stable place for immobilized patients to place their hands on the Alta Multipurpose Device.

Kneefix 3 & Feetfix 3 Cushions

Contributes to better stability, reproducibility and comfort in the supine position.

Monarch Overhead Arm Positioner

Dual function hand grips allow for natural flexion of the patient's wrists while providing increased positioning options for the clinician.

MR Lok-Bar/Locating Bar

Allows positioning devices to be fixed to the couchtop or platform for enhanced reproducibility.

ONE Respiratory Belt

Provides pneumatic compression and immobilization to the abdominal region.

ONEBridge

Unique design features allow for improved patient positioning and compression plate restriction.

Patient Handles

Patient handles provide a stable place for immobilized patients to place their hands on Universal Couchtop, TotalRT Platform or ONEPlatform.

Pro Wing Board

The Pro Wing Board is 23.4" (59 cm) wide and features Individual Hand Grips that are easily adjustable 24 cm on a track in 2.2 cm increments for customized placement of each hand/arm. Four headrest options (Gel Head Rest, Round Head Cup, Posifix Headrests, and Timo Headrests) are indexable in multiple positions.

Prodigy 2 Lok-Bar

Allows positioning devices to be indexed to the TotalRT Platform or Universal Couchtop.

Slide Guide Lok-Bar

Ideal for Vac-Lok bags, the Lok-Bar slides longitudinally along the couchtop rather than locking down to indexing points.

Standard Respiratory Plate

Places pressure at the level of the diaphragm to assist in restricting respiratory movement.

T-Shape Vac-Lok, 108 x 125 cm

Provides arms-up positioning while cradling the torso region. May be used with the Monarch Overhead Arm Positioner or a Wing Board.

Transverse Lok-Bar

Allows the two-pin system to move laterally across the couchtop.

VacQfix Cushions

Contoured positioning that custom forms to a specific patient for enhanced comfort and accuracy.

Wide Respiratory Plate with ComfortCare Cushion

Helps diffuse pressure across the abdominal region while adding a dimension of customized comfort for the patient.

ZiFix Traverse™ Abdominal/Thoracic Motion Control System

ZiFix Traverse attaches to the edges of the Alta Multipurpose device to help immobilize the patient in addition to reducing organ motion.

AccuForm Cushions

Alta and TotalRT All in One Solutions

Allow for direct attachment of Solstice.

ClearVision Thermoplastic

E0 SRS Headrest

E2 SRS Headrest

E4 SRS Headrest

Encompass SRS Adapter Thermoplastic Options

Encompass SRS Anterior Only Fibreplast Mask

Encompass SRS Fibreplast Masks

Made from the most rigid thermoplastic material available, providing anterior and posterior cranial support.

Encompass SRS Fibreplast System

Encompass SRS Immobilization System

Highly rigid, non-invasive immobilization device designed for precisely targeted treatment to the brain, head & neck.

Encompass SRS MR Standalone Device

Encompass SRS Standalone Device

Encompass SRS Standalone Device compatible with bridges

Encompass™ SRS Immobilization System

Head Support

IMRT Reinforced Thermoplastic Style 18

IntegraBite

Integrated Shim System

Innovative Integrated Shim allows independent height adjustment at each pin, providing completely customizable immobilization. Each Integrated Shim can be adjusted in discrete 0.5 mm increments, with a total range of 4 mm.

kVue Encompass SRS Insert

Precise Bite

SGRT Starter Kit

Kit includes: Head Support, Solstice ClearVision Open-face Thermoplastic, Standard (x10), 20 x 35 cm Chamfered AccuForm Cushion (x10), Precise Bite (x5)

Shoulder Thermoplastic

Solstice SRS Immobilization System

The Solstice SRS Immobilization System provides unique corrective pitch capability and positioning flexibility for submillimeter accuracy to treat multiple lesions with a single isocenter. The system is comprised of a head support, customizable cushion and dedicated thermoplastic mask designed for secure and simple attachment. These components create a highly customizable and comfortable head and neck immobilization system for precise treatment to improve patient outcomes.

Solstice™ SRS Immobilization System

SRS Adapter for Portrait & Type-S Devices

Non-invasive solution that enables submillimetric positioning for stereotactic radiosurgery treatments on the Portrait Intracranial Head & Neck Devices and other Type-S devices. The system reduces motion, allowing for maximum dose to the tumor while minimizing radiation delivered to the surrounding healthy tissue.

SRS Cushion Support

Standard Starter Kit

Kit includes: Head Support, Solstice IMRT Reinforced Thermoplastic Style 18, Standard (x10), 20 x 35 cm Chamfered AccuForm Cushion (x10), Precise Bite (x5)

Universal Couchtop

Type-S and Posifix Long Extensions allow for direct attachment of Solstice.

Bellyboard Wall Storage

Compatible with the Carbon Fiber Bellyboard and MRSeries Bellyboard

C-Qual & Evolve Breastboard Wall Storage Device

A convenient wall-mounted rack is available for C-Qual M, C-Qual, and Evolve breastboard storage.

Combifix Wall Storage

Dry Heat Oven/Waterbath Stand

The stainless-steel Dry Heat Oven/Water Bath Stand is an efficient way to store or transfer a dry heat oven or water bath in and between treatment rooms. The stand can be changed to a mobile cart by assembling a set of four lockable casters.

Head, Neck & Shoulders Baseplate Storage

Two-Pin Baseplate Storage, compatible with two-pin Posifix and Posirest baseplates and most other two-pin ready baseplates

Mobile Accessory Cart

This accessory cart has been specially designed to hold a wide variety of patient positioning and fixation devices. The cart can hold up to 300 lbs (135 kg) and measures 40 5/8 x 20 x 37 ¹³/16" (103.2 x 50.8 x 96 cm). An optional storage bin is available for storing smaller items.

ONEBridge Storage Base

Holds the ONEBridge in an upright position. Designed to sit on a countertop or cart.

Overlay Stand

The Overlay Stand is ideal for shared CT rooms, where space is limited. The Overlay Stand creates a fast and effective way to store and protect your CT overlay between uses. The base and strap plate easily mount to the wall, allowing for quick access and out-of-the-way storage. Upper straps secure the overlay between uses.

Storage Cart

Great option for storing kVue inserts, Encompass, Portrait, BoS, Access 360, DoseMax, and Low-e inserts.

Universal Couchtop Long Extension Storage Device

Vac-Lok Storage Rack

This space saving rack holds molded & inflated cushions. Plastic "S" hooks are available for hanging cushions.

Wall Mount

Designed to store your Alta, QUANTUM CT Overlay, DoseMax, Low-e, Access Supine Breast Device, AccuFix Head & Neck Device, and Portrait Intracranial, Head & Neck Device.

Clearline Scar Markers

Clearline low-density scar markers provide distinct outlining of scars and other areas of concern without obscuring micro-calcifications in mammography. These markers are non-metallic and are specifically formulated to eliminate scatter in CT applications.

CT Mark and CT Wire Mark

CT Mark new blue formulation is specifically designed for CT and will not cause artifact.

LiquiMark MRI Markers

LiquiMark fiducial markers are non-metallic, latex-free, and perform consistently and accurately in a variety of applications. Qty 40/Box.

Portal Markers

Set of marker tapes designed to outline the treatment field. This product is useful when planning multiple fields of treatment.

Suremark Relief Tabs

Suremark Relief Tabs have a unique adhesive-free center that won't stick to sensitive areas of the skin.

Visionmark

Visionmark markers are specially formulated non-metallic markers that perform consistently and accurately in a variety of applications. An excellent tool for distinguishing between nipple shadow and lesion, the Visionmark reduces the need for repeat examinations.

Alta AirShuttle

All in one solution can be used for a wide range of indications to reduce setup times.

BoS AirShuttle

The conformal shape of the device optimizes the penumbra and minimizes the blockage of important proton beam angles.

Lithotomy AirShuttle

The patient is positioned once on the Lithotomy AirShuttle prior to insertion and then transferred easily, safely, and comfortably for imaging, treatment, and recovery.

Slate AirShuttle

The Slate AirShuttle features low attenuation and homogeneity for enhanced imaging and treatment. It can be used in conjunction with existing positioning and immobilization devices, further improving workflow efficiencies.

Symphony® Imaging, Treatment & Transfer Solution

A Symphony radiation oncology solution combines an AirShuttle patient platform with an AirDrive system to provide smooth patient transfers between imaging modalities and treatment platforms. A Symphony solution is utilized in imaging modalities including CT, MRI (up to 3 Tesla), ultrasound, and treatment environments including brachytherapy, photon, and proton.

Variable Axis Baseplate

The Variable Axis Baseplate integrates with any Type-S extension or overlay to provide a tilting movement with patient fixation in either prone or supine positions. The unique variable axis design allows for natural head and neck movement and features a rotating knob to lock the baseplate into an angle position from 0°–30° in supine position and 12.5°–32.5° in prone position. The baseplate accommodates Type-S head only thermoplastics and accepts the Prone Face Cushion or the Posifix Prone Headrest via an adapter and shim.

Fixator™ Shoulder Supression System

The Fixator Shoulder Suppression System is designed to enhance the benefits of the Type-S system. The Fixator extends off the couchtop and includes adjustable padded positioners to gently cup the patient's shoulders, capturing and positioning them out of the treatment field. Indexed nomenclature allows for easily recorded shoulder repositioning. Type-S Head Only IMRT Reinforced Thermoplastic masks are recommended for use with this system.

iBEAM® Overlay Adapter

Created for the Medical Intelligence iBEAM and iBEAM EVO couchtops. The overlay is cantilevered, providing minimal attenuation in the area of treatment.

MRI Type-S Overlay

Made of fiberglass with a foam core for use in MR environments. The MRI Overlay is lightweight and three-pin indexable.

Overlay Board

Extends off the end of the treatment couch. An optional reloadable head, neck and shoulders frame for Type-S thermoplastics is available.

Portrait Intracranial, Head & Neck Device

The Portrait device offers superior immobilization for brain and head & neck radiotherapy. It is easy to use and lightweight for daily reproducibility.

Alta Multipurpose Device

Alta can extend beyond the couchtop to provide improved access to the head and neck region. The Alta Multipurpose Device is compatible with Type-S thermoplastic masks, which can be directly attached to the device. A Silverman Adapter Plate enables the use of Silverman headrests to support the cervical spine during simulation and treatment. This setup provides high-precision positioning and reproducibility for head and neck applications.

TotalRT All in One Platform

The TotalRT All in One Platform is designed to quickly adapt many positioning and immobilization solutions to your clinical setup and treatment needs, including head and neck.

Aquaplast RT, ClearVision

Aquaplast RT, ClearVision 2

Aquaplast RT, FreedomView

Aquaplast RT, IMRT Reinforced

Aquaplast RT, Pediatric Standard Perforation

Aquaplast RT, Shoulder Thermoplastic

Aquaplast RT, Standard Perforation

Fibreplast & Aquaplast RT Head Only

Fibreplast & Aquaplast RT Split-frames

Fibreplast & Aquaplast RT with Integrated Shim

Fibreplast & Aquaplast RT, Head, Neck & Shoulders

IMRT Reinforced

IMRT Reinforced, Reloadable

Reinforcement Thermoplastic Strips

Solid w/ Perforated Nose

Standard Perforation

Standard Perforation, Reloadable

ZENTEC, IMRT Reinforced

COUCHTOPS & OVERLAYS

kVue DoseMax Insert

Can be used with the radiolucent kVue Compression Bridges for stereotactic body radiotherapy (SBRT) treatments, improving workflow efficiencies and eliminating the need for a separate SBRT device.

kVue One Low-e Insert

The kVue Low-e insert is a low electron generating, homogeneous insert for enhanced imaging and treatment. It can be used in conjunction with the radiolucent kVue Compression Bridges for SBRT treatments, improving workflow efficiencies and eliminating the need for a separate SBRT device.

Part Number Index

Universal Couchtop™ Long Extension

The Universal Couchtop is a modern and comprehensive solution for enabling advanced treatments in your clinic. Specifically designed to answer the demands of IGRT delivery, the Universal Couchtop Long Extension contains no rails or junctions in the treatment area to help facilitate better dose delivery and target coverage.

Acrylic Supine Baseplate

Carbon Fiber Supine Baseplate

Lateral Baseplate

The Lateral Baseplate is specially padded for comfortable, reproducible lateral head & neck positioning. It accepts a special-width reloadable frame and thermoplastics and comes with a Lateral Head Cushion.

Polycarbonate Headboard

ProBoard Flat Carbon Fiber Headboard

Prone Head Holder

The Prone Head Holder provides variable head angle positioning and features gel chin and forehead pads. This accessory unit integrates with the acrylic standard supine baseplate or the carbon fiber standard supine baseplate (MT20100, MT20100CF–see above) for patient fixation with a Uni-frame thermoplastic mask.

Prone Mask Foam, Qty 8

Tilt-Pro Tilting Base with Low-Pro Swivel Locks

Tilt-Pro™ Tilting Base

Tilt-Pro allows precise angling of the head for prone and supine treatments, avoiding critical structures. It adapts easily to most couchtops, simulator, and CT tables and is designed for one-step molding and positioning of Type-S and Uni-frame masks. Indexable channel arms adjust from 0 to 30° in 5° increments.

Uni-frame Mask for use in prone technique*

*Mask is disposable and sold in Qty 1. Must purchase in multiples of 4.

Upgrade Kit - ProBoard for Tilt-Pro Tilting Base

Aquaplast RT, IMRT Reinforced Style 18

See Vision RT's compatibility statement on back cover.

Aquaplast RT, Standard Perforation

ClearVision

For added customizable hold, see page 103 for Reinforcement Thermoplastic Strips.

FreedomView, IMRT Reinforced Style 18

Reinforcement Thermoplastic Strips

Lead times for these masks vary; contact your sales representative. All disposable thermoplastics are MR Safe.

Slimline Frame

Slimline, Split Frame

Traditional Frame

ZENTEC, IMRT Reinforced Style 18

Helping Hands™

The Helping Hands Cushion Manager is designed to help handle large-size Vac-Lok cushions that tend to hang off the couch during the forming process.

I.D. Tags

Color-coded tags provide quick identification of patient cushions. Tags are available in assorted colors and include tie strings.

Prone VacQfix Indexer

Slide Guide Lok-Bar

The Slide Guide Lok-Bar does not lock down to the indexing points along the couchtop but slides longitudinally along the couchtop. It is designed to prevent lateral movement and is useful for longer devices such as bellyboards, breastboards and Vac-Lok Cushions, which contract during forming.

Storage Racks

This space-saving rack holds molded & inflated cushions. Plastic "S" hooks are available for hanging cushions.

Vac-Lok Cleaner

This spray is available for use on Vac-Lok cushions.

VacQfix Indexer

Dual Function Compressors

The Dual Function Vacuum Compressor, available in a 115V and 230V version, provides both a vacuum and inflate cycle with a convenient hand control or optional foot control. It provides an audible alarm when your optimum vacuum level is reached.

Vacuum Pumps

Vacuum Pumps are simple to use and allow you to mold firm, stable patient positioning cushions in minutes.

"T" Cushion

Arms Up Vac-Lok, 105 cm long, 28 L Fill

Arms Up Vac-Lok, 75 cm long, 20 L Fill

Hip & Pelvic Vac-Lok Cushions

Monarch Wing Board Vac-Lok, 108 x 55 cm

Non-Rectangular Vac-Lok Cushions

One Arm Up Vac-Lok, 34 L Fill

Prone VacQfix Indexer

RectalPro™ 75 Endorectal Balloon (ERB)

The curved shaft design of the RectalPro enhances patient comfort. The air/water fill volume is adjustable to meet clinical needs, ensuring reproducible balloon positioning. Overall, it minimizes prostate movement during treatment and allows for consistent positioning.

Rectangular Vac-Lok Cushions

Split Leg Cushion

For use with the HipFix System (see page 148).

T-Shape Vac-Lok, 108 x 125 cm

Type-S Cushion

Vac-Lok™ Cushions

Vac-Lok Cushions create a rigid and secure support around the patient when a vacuum is drawn through a self-sealing quick-release valve. These cushions retain their shape and guarantee stability and reproducibility of the patient's position for up to six weeks once the air is vacuumed out.

VacQfix Cushions

VacQfix Cushions

VacQfix™ Cushions

Custom formed for patient comfort and positioning accuracy, becoming rigid when vacuum is applied. They can be cleaned and reused after each course of treatment. Our fine denier fabric and small-diameter foam bead fill combine to increase conformity and reproducibility.

Wing Board Vac-Lok, 88 x 55 cm, 15 L Fill

Precise Bite Warmer

The Precise Bite Warmer softens a Precise Bite, GrayDuck Stent, or GrayDuck Dart without a microwave or water bath.

Water Bath

The Water Bath accommodates all thermoplastic sizes including Type-S head, neck and shoulders, HipFix, and ThermFix thermoplastics.